PASSPORT® Vertical Platform Lift
Technical Specifications
© 2013-2014 EZ-ACCESS, a division of Homecare Products, Inc. All rights reserved
All text and/or images contained in this document are proprietary and may not be shared, modified, distributed,
reproduced or reused without the express written permission of Homecare Products, Inc.
PL52SP3651 PL52TP3860 PL72SP3651 PL72TP3860
216 lbs (98 kg) 216 lbs (98 kg) 247 lbs (112 kg) 247 lbs (112 kg)
HEIGHT AT MAXIMUM TRAVEL:
50.75” x 36”
(1289 mm x 914 mm)
59.75” x 38”
(1518 mm x 914 mm)
50.75” x 36”
(1289 mm x 914 mm)
59.75” x 38”
(1518 mm x 914 mm)
FOOTPRINT (RAMP DEPLOYED):
SEE “DIMENSIONS” SECTION ALSO
76" X 52"
(1930 mm x 1320 mm)
85" X 52"
(2159 mm x 1320 mm)
76" X 52"
(1930 mm x 1320 mm)
85" X 52"
(2159 mm x 1320 mm)
landing-to-landing
landing-to-landing
landing-to-landing
landing-to-landing
NOTE: Weights and dimensions are approximate and subject to change.
B44.1 / ASME A17.5, ASME 18.1-2008 (Sec 5)
750 lbs. (340 kg)
Two (one occupant with mobility device, plus one caregiver). Not to exceed Maximum Rated Load
24 VDC supplied by two 12 VDC-12 Ah sealed lead-acid batteries, 2 amp smart charger
CONTROL CIRCUIT ELECTRICAL:
24 VDC worm drive; .58 hp; 28:1 reduction ratio; 96 rpm output speed rating
1” diameter Hi-lead ® drive screw with bronze nut and bronze safety back-up nut
24 VDC reversing relay, 12 VDC control input, 30-amp auto reset circuit breaker
Worm drive gear motor
STANDARD INTERFACE CONTROLS:
12 VDC; separate, continuous, low pressure large mushroom-head control switches for “UP/DOWN”
operation; onboard LED indicator lights, including diagnostics for quick and easy reference; user adjustable
control box; keyed operation
Red, sealed, 1.5” diameter mushroom-head, push button
NUMBER OF STOPS/LANDINGS:
Two stops (upper and lower landings)
Welded aluminum extrusion with powder coated structural steel base legs
Welded aluminum, 1.9” (48.3 mm) MDS nylon 6/6 rollers, and UHMW polyethylene low friction buffers
Welded aluminum, totally enclosed, removable aluminum framed side enclosures with coated steel filler
panels
Formed aluminum safety pan with obstruction detectors, designed to stop lift upon contact with an obstacle.
Takes less than 15 lbs. (6.8 kg) of pressure to activate safety pan stop
Self-actuating 24” (610 mm)
Manual hand-crank lowering capability
Upper and lower primary and secondary limit switch triggering locations are adjustable via movable cams
WEIGHT OF TOP LANDING GATE:
Anchor-ready powder coated structural steel legs (concrete anchors not included)
MOUNTING SURFACE RECOMMENDED:
A level, ≥ 3,500 psi concrete pad with a 4” minimum thickness
Chevron Ulti-plex® Synthetic Grease EP, NLGI Grade 1.5 (or equivalent)
Comentarios a estos manuales