Ez-access PATHWA MODULAR ACCESS SYSTEM Manual de usuario Pagina 45

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 49
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 44
- 45 -
6.9.10.
If there is are support tubes in the ramp run, the same method as described
above for platforms can be used. Otherwise, drill a 5/16 hole below the
tread surface (approximately 3/4 above the bottom of the side rail) and
between the ribs underneath the treads in each of the side rails at the
desired location.
6.9.11.
Install one of the 5/16 eyebolts and secure to the ramp using one 5/16 flat
washer and one 5/16 nut in each hole (FIG. 6.25).
6.9.12.
Secure one end of the wire rope to the eyebolts using the supplied 3/16″ wire
rope clamps.
6.9.13.
Repeat for all locations.
FIG. 6.25
Vista de pagina 44
1 2 ... 40 41 42 43 44 45 46 47 48 49

Comentarios a estos manuales

Sin comentarios